Our BASIC FLU and EASY FLU Polypreparators

The BASIC FLU and EASY FLU from SiTech are systems for preparing polyelectrolyte solutions.

Our polypreparators are used in mechanical dewatering processes of sludge produced by centrifugal extractors. Their main function is to obtain polyelectrolyte solutions with the desired concentration.

 

polipreparatore-EASY-FLU-SiTech
Polipreparatore Easy Flu di SiTech

FEATURES

The Polyelectrolyte BASIC FLU from SiTech is a system of semi-automatic praparation of polyelectrolyte solutions. Its function is to obtain in-line polyelectrolyte solutions by feeding it directly into the extractor; it is set up for automatic operation with tank and level control.

The EASY FLU polyelectrolyte from SiTech is set up for fully automatic production of polyelectrolyte solution. Its function is to obtain polyelectrolyte solutions with the desired concentration in a totally automatic way avoiding product waste and allowing perfect dispersion and homogenization of the same because it is proportioned to the sludge flow rate.

The Polyelectrolyte BASIC FLU from SiTech is a system of semi-automatic praparation of polyelectrolyte solutions. Its function is to obtain in-line polyelectrolyte solutions by feeding it directly into the extractor; it is set up for automatic operation with tank and level control.

The EASY FLU polyelectrolyte from SiTech is set up for fully automatic production of polyelectrolyte solution. Its function is to obtain polyelectrolyte solutions with the desired concentration in a totally automatic way avoiding product waste and allowing perfect dispersion and homogenization of the same because it is proportioned to the sludge flow rate.

The Polyelectrolyte BASIC FLU from SiTech is a system of semi-automatic praparation of polyelectrolyte solutions. Its function is to obtain in-line polyelectrolyte solutions by feeding it directly into the extractor; it is set up for automatic operation with tank and level control.

The EASY FLU polyelectrolyte from SiTech is set up for fully automatic production of polyelectrolyte solution. Its function is to obtain polyelectrolyte solutions with the desired concentration in a totally automatic way avoiding product waste and allowing perfect dispersion and homogenization of the same because it is proportioned to the sludge flow rate.

Polypreparators BASIC FLU

  • Without tank

  • Hydraulic flow rate 6000lt/h

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

Polypreparators EASY FLU

  • 500lt / 1000lt single tank with agitator

  • Hydraulic dissolved polyelectrolyte preparation capacity 500lt and 1000lt

  • Hydraulic flow rate 4000lt/h with 500lt tank

  • Hydraulic flow rate 8000lt/h with 1000lt tank

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

Polypreparators BASIC FLU

  • Without tank

  • Hydraulic flow rate 6000lt/h

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

Polypreparators EASY FLU

  • 500lt / 1000lt single tank with agitator

  • Hydraulic dissolved polyelectrolyte preparation capacity 500lt and 1000lt

  • Hydraulic flow rate 4000lt/h with 500lt tank

  • Hydraulic flow rate 8000lt/h with 1000lt tank

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

Polypreparators BASIC FLU

  • Without tank

  • Hydraulic flow rate 6000lt/h

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

Polypreparators EASY FLU

  • 500lt / 1000lt single tank with agitator

  • Hydraulic dissolved polyelectrolyte preparation capacity 500lt and 1000lt

  • Hydraulic flow rate 4000lt/h with 500lt tank

  • Hydraulic flow rate 8000lt/h with 1000lt tank

  • Dissolution percentage: solution capacity of pure poly concentration from 1×1000 to 15×1000

BASIC FLU

0 Liters/h

EASY FLU 500 Lt

0 Liters/h

EASY FLU 1000 Lt

0 Liters/h

BASIC FLU

0 Liters/h

EASY FLU 500 Lt

0 Liters/h

EASY FLU 1000 Lt

0 Liters/h

TECHNICAL SPECIFICATIONS

The BASIC FLU Polypreparator consists of:

  • 0.37kw mono pump

  • Inline static blender

  • Water line check valve

  • Membrane EV for water inlet

  • Poly dosing pump with mechanical variator from 4 lt/h to 100 lt/h of emulsion

  • Bulb-mounted optical flow meter on central rod from 0 mt to 6 mt

  • IP66 polyester electrical box

  • Aisi 304 frame

  • Provision for level control from 3-rod tank, downstream pump stop control

The EASY FLU Polypreparator consists of:

  • 0.75kw agitator motor

  • 0.75kw mono pump

  • Inline static blender

  • Water line check valve

  • Pneumatic EV for water inlet

  • Electromagnetic inlet water meter

  • Inverter-driven poly dosing pump that adjusts dosing according to hydraulic flow rate and set poly count

  • Touch-screen panel for setting data

  • PLC control system

  • Electrical panel in Aisi 304 stainless steel

  • Aisi 304 tank

  • Rod level control with anti-locking system